4 Revolutionary boat cleaning solutions that will make your boat shine without the time, safely and effectively!
1) Aluminum Pontoon Cleaner The Aluminum Pontoon Cleaner is a revolutionary product that is safe and environmentally friendly. It cleans and brightens pontoon tubes from top to bottom without ACIDS, safely and effectively. There is NO SCRUBBING required! Just use a Hudson Sprayer or spray bottle to spray the Aluminum Cleaner on bare aluminum. (Do not use on painted aluminum). Allow cleaner to sit on the bare aluminum for 5 to 10 minutes, keeping all surfaces wet. Finally, rinse well with a high pressure washer. That’s it! (Please note that heavily soiled areas may require repeating). To view a demonstration, please visit www.stfisolutions.com.
2) Boat Wash The boat wash is a powerful product that can be used for above waterline and for the interior of both aluminum and fiberglass boats. It helps to remove oxidation mineral buildup, mold and mildew from the outside and inside of your boat without ACIDS, safely and effectively. Just use 2 oz. of concentrated boat wash per gallon of water, and use a Hudson Sprayer or spray bottle to spray one side of the boat at a time. Allow the wash to sit a few minutes. Then with a soft brush, agitate the product. Rinse with a hose or a pressure washer. If heavily oxidized, repeat step. To view a demonstration, please visit www.stfisolutions.com.
3) Degreaser The degreaser safely and effectively removes oil from all types of surfaces without ACIDS, and is safe for you and the environment. First, it must be diluted 5-1 to 25-1. (Test painted surface before broad use). Spray degreaser on area to be cleaned, and allow time for solution to sit. Rinse with water, wipe or air dry. (Please note heavily soiled area may require repeating). To view a demonstration, please visit www.stfisolutions.com.
4) Hull Cleaner The hull cleaner is a great product to use if you want to remove algae and mineral buildup from the bottom of your boat. This safe and effective product has no ACIDS, requires no scrubbing, and is environmentally friendly. Using a Hudson Spray or spray bottle, spray the boat scum remover over the area to be cleaned, working from bottom to top. Allow the cleaner to sit on the bottom of your boat for a few minutes. Working from top to bottom, use a high pressure sprayer with clean water to remove the film from the hull. (Heavily soiled areas may require repeating). For use below the water line, and/or to clean the rest of the boat and interior, use our Boat Wash. To view a demonstration, please visit www.stfisolutions.com. Get the Shine Without the Time! Walt and Hally Lepczyk Owners Service Technologies and Filtration Inc. (810) 820-4452
This item was created by the source, which is solely responsible for its content.
